User Diaries / Re: My very very long solar tracker build
« Last post by XeonPony on April 26, 2024, 05:11:38 PM »will cut a smaller plate for next run, to facilitate better clamping
Looks like either your drill press table is tilted or you didn't clamp the work piece down and it walked a bit...Aluminum is a pain to drill/cut the material will walk a LOT unless clamped tight
Attachments: IMG_20240424_065055.jpg IMG_20240424_065055.jpg
ok then unless Ed and Joe will reconsider their stance on letting me hang or actually helping me I will just for now wait until better minds come with better suggestions I can not know when I will erupt again but please trust that my lava is always reasonabl
Now dear TechAdmin. I think you trust that I hold you high to that is why I made my choices.
Make coils, build machine, test, make a new stator if needed, test, revamp the structural parts as needed, test... some things CAN NOT be 10% decided on pen and paper... guys with access to supercomputers even make mistakes running their models!
Your project has an audience. We await pictures.sorry my dear bother. I realize now that I am failing to hold 2 channels in equal status.
Make coils, build machine, test, make a new stator if needed, test, revamp the structural parts as needed, test... some things CAN NOT be 10% decided on pen and paper... guys with access to supercomputers even make mistakes running their models!
Make coils, build machine, test, make a new stator if needed, test, revamp the structural parts as needed, test... some things CAN NOT be 10% decided on pen and paper... guys with access to supercomputers even make mistakes running their models!
Check it out, we follow a standard of logic here, Basically we are a group of engineers. You are operating 3 ideas at once.
carry on.
well then do not bring forth said prophets if no one is willing to follow/defend them.
Thw waterwheel in this video looks like yours.
https://www.youtube.com/watch?v=lCNcwsglZP8
Brandnewb, do not tease us lol
No really Brother. I need to know what you actually meant to convey!!
Brandnewb, do not tease us lol
Attachments: base line measurements.png base line measurements.png
Attachments: Screenshot_20240407-152259.png Screenshot_20240407-152259.png Screenshot_20240408-045040.png Screenshot_20240408-045040.png Screenshot_20240408-171428.png Screenshot_20240408-171428.png Screenshot_20240409-171528.png Screenshot_20240409-171528.png Screenshot_20240410-051302.png Screenshot_20240410-051302.png Screenshot_20240410-182554.png Screenshot_20240410-182554.png Screenshot_20240411-174344.png Screenshot_20240411-174344.png