all diodes are not created equal
there are avalanche diodes which are typical of automotive alternators
such clamp at~30volt for the 12 volt alternators
then you have to be concerned with recovery rates, those suitable for 50/60hz
can go into full time conduction when met with 400plus hz, again clamping the output
so you need a fast recovery, high amp (twice what you need in my opinion) high voltage non avalance (twice at least of your system voltage) and fast recovery.
this effectively precludes the use of those nice large and well priced rectifier bridges that commonly come up on ebay, that were used in industrial drives and other 3 phase rectification because they are not fast enough.
look for hd early bridge rectifiers from the alternator oem, early versions did not use avalanche diodes and were fast recovery.
bob g