« previous next »
Pages: Prev 1 [2]   Go Down

Author Topic: Hurrican Electric New Genny Up  (Read 3433 times)

0 Members and 1 Guest are viewing this topic.

s4w2099

  • Full Member
  • ***
  • Posts: 234
Re: Hurrican Electric New Genny Up
« Reply #33 on: April 17, 2007, 07:32:41 AM »
Even a tail light from your car would work. Those are easy to remove. Most of them are 35Watts so at 12V it should not be able to move the needle  much at all.
« Last Edit: April 17, 2007, 07:32:41 AM by s4w2099 »
Logged

Kevin L

  • Jr. Member
  • **
  • Posts: 64
Re: Hurrican Electric New Genny Up
« Reply #34 on: April 17, 2007, 03:20:59 PM »
I'd say you have a nice genny.  Love to hear more about the construction.
« Last Edit: April 17, 2007, 03:20:59 PM by Kevin L »
Logged

dastardlydan

  • Jr. Member
  • **
  • Posts: 75
Re: Hurrican Electric New Genny Up
« Reply #35 on: April 17, 2007, 06:42:39 PM »
 The anemometer is mounted 18 inch.below the turbine

blades, that is 66 feet up in the air.


 Standard 35 amp bridge rectifier( 3 ) of them.

The setup is from rectifier + and - to volt meter

- to amp meter to diode to battery.

Diode is to stop feed back from battery.


  Will do the FLUX thing as soon as I can

just to see what happens.


DanM

« Last Edit: April 17, 2007, 06:42:39 PM by dastardlydan »
Logged
Pages: Prev 1 [2]   Go Up
« previous next »