This is a call to show off layout plans and/or photos of AC/DC power control panel examples to copy for a 27-foot Airstream I am refurbishing. Anyone seen any slick central panels I should copy? I guess I have about a two by four foot area to lay it all out on. I've found a nice stainless refrigerator door to use as PC hutch desktop - AC/DC controls, converter & inverters and 1/2 the battery bank will be built in underneath it. Most of the items I've already collected, list on request.
Eventually the trailer will be used to homestead a piece of land (while permanent structure is built) and I know I need to provide for future wind and solar so am running extra conduit and pre-wire for two (2) future inputs and leaving a blank panel face for future controls & indicators. Four (4) golf-cart batteries will be 1st bank and later may go much larger and am wiring the DC primaries with 4/0 Cu cable.
What am I missing? In IRC a suggestion was given to fabricate a "Tilt-out" rack for easy access to wiring (which sounds doable) and I have plenty of aluminum angle and box to fabricate modules out of... Having the spendy items locked in place but w/ quick-disconnects for putting them in secure storage is another good IRC idea.
Anyhow, I've also lost all my bookmarks here - PC motherboard finally went & am dizzy from googling everything from Yachts to custom coach RV's trying to find examples of layouts... Any and all ideas welcome to keep me from re-inventing the wheel. Thanks for reading this far, hope you post links, photos or ideas.