hello all,
i have a welder in the back yard and ready to start a tower for my 11 ft turbine.
i have a rohn tower same as behoof. (also making it a tilt up.)
1st section 7 ft 9 inch, with 3 10 ft sections with 7 ft pipe on that.
my question is do i need to run a cable to every joint.
i am planning on running cable to every joint on tilt pipe. was hoping to run cable at 17 ft. 9 in. and just under 7 ft top pipe.(2 cables with 4 at each station.)
i have no experience with any of this stuff except what i have learned on this sight. and i am very thankful for all help.
i plan on furling very early probably at 22 to 25 mph wind.
thanks windwatcher