ok i posted a diary entry but the pics where huge so here goes again
![](http://www.otherpower.com/images/scimages/635/1_11_6_2.JPG)
![](http://www.otherpower.com/images/scimages/635/1_11_6_3.JPG)
here are a couple in self etching primer
![](http://www.otherpower.com/images/scimages/635/1_11_6_4.JPG)
![](http://www.otherpower.com/images/scimages/635/1_FC96_1.JPG)
heres a couple with the tail mocked on so we can do all drilling before paint
![](http://www.otherpower.com/images/scimages/635/1_0D9A_1.JPG)
this one should show the 5 degree tilt of the spindle
![](http://www.otherpower.com/images/scimages/635/1_0D9E_1.JPG)
![](http://www.otherpower.com/images/scimages/635/1_0D92_1.JPG)
couple after paint showing the metalic paint
![](http://www.otherpower.com/images/scimages/635/1_0D96_1.JPG)
this one should show the furl stop i added i actually notched the tail pipe to much so this seemed like a shure fire way of keeping the tail outa the blades.
got my magnets and rotor discs from dan today so i can get started on those and then a stator. will keep the updates coming