Courtesy of Bryan D. (the one to thank for this!)
Make Your Own Magnetic Fluid!! This idea came from a good friend of mine (Bryan)
I always wanted to see what magnetic fluid was like, I suggested this to a friend of mine and he stated that photocopier toner was magnetic, within like five min's I was holding a half jar full of the stuff. This is something interesting!!!
Mix some oil (thinner oil seems to be better) and standard photocopier toner, mix some together and play with a magnet in an open jar on the inside of the jar using magnets on the outside of the jar. Unreal effects.
Slowly add oil to a little bit of toner to get the right mix, mix well in a small jar. play with getting just the right mixture, Play with this stuff!! - Word O Caution... Once toner gets on anything, it's almost impossible to get off. It is highly suggested that once mixed be careful, don't spill or put on fingers or clothes. Do not do direct contact between magnet and fluid if you value your magnet, they will never come apart, keep magnets and fluid separated between an insulator.
Things to try, bring a magnet up to the bottom of the jar and slowly move it up, you will se the fluid moving upwards, then pull the magnet away rapidly, the fluid will just release. 2) rotate the magnet slowly on the outside of the jar. 3) allow the magnet to stay a few moments stuck to the side of the jar by the fluid, watch. 4) place magnet close to the edge of the top of the fluid and watch it go upwards.
Lets us know of other interesting experiments that you do and post your findings and comments!