hello good people
i hope you are all safe and well in these strange times.
i am looking for a little advice if i may.
i have read as many posts as i can regarding the ozinverter etc and rewinding the aerosharp transformer.
i have acquired a single unit. i cannot get my hands on a second to make a 6kw transformer,.
so i have decided i will go with a single.
can the original secondary (230v) be left in place and used as is. just rewind the secondary (now primary)
if so, what size primary would i need and how many turns for 24v?
i am guessing 14 turns and 50mm. (9:1 ration or there abouts.
i am hoping i can leave the 230v winding as is.
i plan to use the wire from the 250v winding to make my primary just unsure how many in hand i would need to make 50mm.
with a sufficiant sized board, could the transformer do short bursts of 4kw?
many thanks guys
stay safe