Author Topic: System Fuse size  (Read 816 times)

0 Members and 1 Guest are viewing this topic.

JDog

  • Newbie
  • *
  • Posts: 3
System Fuse size
« on: February 02, 2008, 03:15:11 PM »
 All, on the PV side of the house I have four 40 watt panels hooked in paralel because of major shading issues. I have a 15 amp charge contoler charging tow 6 volt batteries, what size in line fuses should I be using on the input and out put sides of the controller?

Thanks . JDog
« Last Edit: February 02, 2008, 03:15:11 PM by (unknown) »

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Re: System Fuse size
« Reply #1 on: February 02, 2008, 10:43:19 AM »
 9 amp slow blow at the panel so you can run large wire to the controller. No brainer out of the controller.

« Last Edit: February 02, 2008, 10:43:19 AM by tecker »