A really nice unit made of durable Polycarbonate (Lexan®). Mounting, glueing and balancing those durn Easter Eggs was a pain in the butt. With this thing, you just press the cups into the hub and are ready to rock n roll.
http://www.wondermagnets.com/cgi-bin/edatcat/WMSstore.pl?user_action=detail&catalogno=4201
CATALOG COPY
**********
A quick and easy way to build your own anemometer! A windspeed meter is essential both for evaluating a site for wind power potential, and for measuring the performance of your wind turbine. The most tedious part of building our Easter Egg Anemometer was fabricating and balancing the cup assembly. This product makes that easy! You can use it for any design, including bicycle speedometer versions.
The 3 cups and the hub are made from extremely durable black polycarbonate plastic (Lexan®). They ship unassembled, and the cups simply press fit very firmly into the hub -- no glue is needed. In both of the anemometers we built with these cups, no balancing was needed. There is a 3/32 inch diameter reinforced hole in the exact center of the hub to make fitting your own shaft, bearing, or surplus gadget to the hub fast and easy.
The total diameter of the unit is 4.125 inches. Each cup is 2.5 inches in diameter. The hub is 1.5 inches in diameter and 1.375 inches deep.
No sensing apparatus is included, that is up to you. This product includes the cups and hub assembly only.
$20.00