coil is 30 turns of 26awg
the magnets are spinning but no result
(Attachment Link)
I wanted to say that I have one of these DMMs too, it will not give any results without the coils spinning constantly. It has a setting for 200Vac and 750Vac.
If you can, go find a hobby shop and see if they have a cheap-O meter that has the swing arm rather than digital, set it for the lowest setting, usually involves moving
RED wire to different hole on meter.
As Flux and others have said, move the coil as close as possible to magnet, maybe only use envelope or couple pieces of paper as gauge then spin.
The swing arm should move either way then.
Best of luck. Nice setup tho
.
Bruce S