« previous next »
Pages: [1]   Go Down

Author Topic: Help! Stack clock fault in magnum inverter  (Read 4717 times)

0 Members and 1 Guest are viewing this topic.

Dougrunner

  • Newbie
  • *
  • Posts: 16
Help! Stack clock fault in magnum inverter
« on: October 27, 2012, 11:38:13 PM »
Today a hooked up a brand new magnum 4024PAE  inverter and when I went to fire it up it wouldn't turn on. I plugged in the remote, and it comes up saying there is a "stack clock fault". But I am not stacking any inverters and have nothing plugged into the stacking port.  Rebooting the inverter doesn't help.

Please someone help!
Logged

dnix71

  • SuperHero Member
  • ******
  • Posts: 2524
Re: Help! Stack clock fault in magnum inverter
« Reply #1 on: October 30, 2012, 08:18:19 PM »
Read the manual. Otherwise send it back. It's new. You pay for a warranty, use it.


Logged

dnix71

  • SuperHero Member
  • ******
  • Posts: 2524
Re: Help! Stack clock fault in magnum inverter
« Reply #2 on: October 30, 2012, 08:21:25 PM »
Also, check the settings. They stick even on a reset. If the inverter is set to stack and there is no cable it will fault.

Logged

ChrisOlson

  • SuperHero Member
  • ******
  • Posts: 3642
  • Country: us
Re: Help! Stack clock fault in magnum inverter
« Reply #3 on: October 30, 2012, 10:24:01 PM »
I think I'd call Magnum Energy's tech support people.  I've talked to them before and Magnum has top notch tech support.
--
Chris
Logged
Pages: [1]   Go Up
« previous next »