300+ EnerSys 12V190F Batteries - Never Used

[RyanM923]

Message me here or emails at ryan(dot)miskin(AT)yahoo(DOT)com if you have any questions. 

Ok, I have for sale a large quantity of EnerSys 12V190F Telecom batteries that would be great for solar/wind/etc power storage.  Top mounted terminals and hardware to have the terminal posts out front as well.  These are roughly a year old , give or take a few months, but have never been used.  They were bought from a telecom company that ended up not being able to use them.  We have load tested several and they test fine.  We will check voltage to make sure there are no dead cells before shipment.  Shipment is done through Estes, the freight company we use on a daily basis at our business.  They are simply taking up too much space in the warehouse, so price is going to be cheap to get them moving.  Otherwise, we'll just scrap them soon to get credit from our manufacturer.

The minimum order is 4 batteries so that freight shipping becomes reasonable.  Price?  $699 per set of four plus freight.  Shipping is from the central US so it is reasonable to each coast.  Average shipping quote for four of these is right around $150, so expect a total around $850 for four of them.  As always, the more you buy, the cheaper they get...and the better the shipping ratio becomes as well.  Get 8 and you should be under $200 per battery to your door, which is nearly 1/3 retail cost on these.

EnerSys PowerSafe 12V190F Battery Specifications
Chemistry: Sealed Lead Acid
Voltage: 12 volts
Nominal Capacity: 190Ah
Terminals: M6
Dimensions (L x W x H): 22.10 x 4.90 x 12.40
Weight (pounds): 126.30


http://www.osibatteries.com/p-18485-enersys-powersafe-12v190f-battery-12v-190ah-front-terminal.aspx

[RyanM923]

You can also shoot me a text at 972(DASH)672(DASH)6692 with any questions, or with your quantity/location for a total quote.
RyanM923;
You will notice that we modified your two post.
SPAMbots are all over this and many other websites. It is unwise to put your email address in full and your phone number in full, they'll have a filed day with it.
Cheers
Bruce S

[Bruce S]

OKAY Folks;
There's a first time for everything :-) and the GMs Mods et al; are happy to oblige
Here's the post about the batteries.

[RyanM923]

Thanks Bruce, appreciate your helpfulness.

Here are some more pics as well of the terminals and of how they are packaged for shipment (that's 4 on a pallet).

[thirteen]

Could I have the state you are in. I am headed to Wisconsin. 13

[RyanM923]

Could I have the state you are in. I am headed to Wisconsin. 13

They are in Oklahoma, where are you coming from?

[thirteen]

Idaho Panhandle / Western Montana Almost out of my way. I'll have think about it I have a son in Edmond.13

[RyanM923]

Idaho Panhandle / Western Montana Almost out of my way. I'll have think about it I have a son in Edmond.13

How many would you possibly be interested in getting? 

[thirteen]

My dish network sometimes goes out around 8pm      8 batteries if I can make it work travel wise. 13

[RyanM923]

My dish network sometimes goes out around 8pm      8 batteries if I can make it work travel wise. 13

I can do 8 of them picked up for $1350.  Shipping might be high out to you since it's sort of out there, maybe $400 or so.

[RyanM923]

Local guy needed some of these, but he's always out of town....so we just had them shipped to me instead so he can come by and get them at his convenience.  Here they are all packaged up and ready for shipment, 13 of them.

[thirteen]

The prices seems ok but it is  just to far out of my way and he will not be coming up here as planned. 13

[RyanM923]

Yeah, shipping for 8 out to you would be in the $350 area, so kinda pricey there also.

[RyanM923]

Just got 13 of these shipped to me for a local guy to pick up...these things are monsters.  I'm used to carrying around 100l C&D batteries, and these things put them to shame.  Also, it looks like these is an M8 bolt for the threaded post.  I believe the M6 in the spec sheet is for the bolt stud coming out of the front-mount terminal posts that you can add on to these.  I'm including a picture of the M8 bolt next to the smaller 1/4" bolt I use for the C&D 490MR's.

[RyanM923]

Just dropped off those 13 batts to a local guy using them for solar power. He's a helicopter pilot trainer and services simulators all over the world, and said he has some pretty high tech battery testing equipment where he can monitor how the battery handles a load, etc. So I will be hearing back from him with some test results on these in case anyone is skeptical on them sitting for too long.

I put an agm charger on them and it'd be at 13.65-.7 in float mode, which is right in the area it should be.

[RyanM923]

Ok, so after some big orders here in the last few weeks, there are only about 80 of them left.  I imagine they will all be gone in about two weeks at the most, so hop on them while you can.

[Homesteader1]

Do you still have these batteries? I would be interested in either 8 or 12 each.
Dale

[DamonHD]

He's not been on since April, so unlikely.  Maybe send him a PM.

Rgds

Damon

[RyanM923]

Yes, these were all sold a good while ago, sorry Homesteader.