« previous next »
Pages: [1]   Go Down

Author Topic: New Multi-Rotor Turbine  (Read 1477 times)

0 Members and 1 Guest are viewing this topic.

DougSelsam

  • Newbie
  • *
  • Posts: 4
New Multi-Rotor Turbine
« on: April 06, 2004, 01:27:24 AM »


So anyways, yeah it makes like 1000 watts at 16 mph, 4000 watts at 28 mph, peaks of 5000 watts so far in the furled position.  Funded by the California Energy Commission.

Doug Selsam

http://www.selsam.com
« Last Edit: April 06, 2004, 01:27:24 AM by (unknown) »
Logged

wiredup

  • Newbie
  • *
  • Posts: 30
Re: New Multi-Rotor Turbine
« Reply #1 on: April 06, 2004, 08:45:55 PM »
HI doug nice genny!!! have looked at your website almost a year ago,or so.i can tell you put some thought and alot of work into your machine.would you share with us some spec.on your genarator and rpms. thanks staples....
« Last Edit: April 06, 2004, 08:45:55 PM by wiredup »
Logged

DougSelsam

  • Newbie
  • *
  • Posts: 4
Re: New Multi-Rotor Turbine
« Reply #2 on: April 10, 2004, 11:58:35 PM »
I'm guessing 800 - 1000 rpm peaks.

They are two 3-phase alternators with 28 poles and 84 slots inside the same case.

Each rectified externally and separately.

« Last Edit: April 10, 2004, 11:58:35 PM by DougSelsam »
Logged

hvirtane

  • Hero Member
  • *****
  • Posts: 712
    • About Solar Cooking
Re: New Multi-Rotor Turbine
« Reply #3 on: April 11, 2004, 01:13:32 PM »
A really interesting machine.


How is the 'rod', where the wind turbines

are, supported so that it doesn't bend?


- Hannu

« Last Edit: April 11, 2004, 01:13:32 PM by hvirtane »
Logged
Pages: [1]   Go Up
« previous next »