Well,
With a not propper hook-up,
(just from the wall by the woodstove outlet)
{a place I use a lot for easy 12 VDC access
because the stove isn't finished yet, lol}
The wire size is all wrong for any large stuff
to be used there, but just to see if it would even
work, I used it anyway.
And, it works but wouldn't start the big old TV.
But it would run my DVD player, (a 75 watt one runs it), lol.
So maybe after next weekend, (if I get a chance to play with it,
girlfriend has me working pretty hard on the doors, windows and floor trim).
I'll have more to post about this inverter.
The remote switch will turn it on even if the main switch is off,
and has a light to let you know it's on.
The DC Volt level LED Bar works pretty good, but was showing a bit low I
thought, but could be from bad hook-up.
