« previous next »
Pages: [1]   Go Down

Author Topic: Phase wire hook up  (Read 1031 times)

0 Members and 1 Guest are viewing this topic.

trumpets3u

  • Newbie
  • *
  • Posts: 36
Phase wire hook up
« on: February 07, 2009, 10:50:11 PM »
Does it matter what wire you use, start to start or the start wire to the end wire when you are hooking up your 3 coils?

                  Thanks Brian
« Last Edit: February 07, 2009, 10:50:11 PM by (unknown) »
Logged

electrondady1

  • SuperHero Member
  • ******
  • Posts: 3120
  • Country: ca
Re: Phase wire hook up
« Reply #1 on: February 08, 2009, 06:55:20 AM »
you don't give us much to go on brian.

is it a three phase alternator ?

perhaps a nine coil /12pole design?

if so , the wire in the coils of each phase are run in series.

end to start, then, end to start, so to speak
« Last Edit: February 08, 2009, 06:55:20 AM by electrondady1 »
Logged

ghurd

  • Super Hero Member Plus
  • *******
  • Posts: 8059
Re: Phase wire hook up
« Reply #2 on: February 08, 2009, 08:01:22 AM »
« Last Edit: February 08, 2009, 08:01:22 AM by ghurd »
Logged
www.ghurd.info<<<-----Information on my Controller
Pages: [1]   Go Up
« previous next »