Author Topic: Up and running  (Read 913 times)

0 Members and 1 Guest are viewing this topic.

WindJuggler

  • Newbie
  • *
  • Posts: 36
Up and running
« on: March 09, 2009, 07:11:59 PM »
My windmill is up and running for good.


The first time I posted about the windmill it was a test setup.


If you want to see some pictures check out this  link.


I haven't installed the plumbing yet.

« Last Edit: March 09, 2009, 07:11:59 PM by (unknown) »
Wim

Janne

  • Full Member
  • ***
  • Posts: 244
  • Country: fi
  • Turbiini
    • My image gallery
Re: Up and running
« Reply #1 on: March 09, 2009, 02:34:15 PM »
Hi!


The mill looks super!


How tall is the tower? Your method of raising looks a bit hair raising to me :D

should be ok as long as not too many start slacking :)

« Last Edit: March 09, 2009, 02:34:15 PM by Janne »
Nothing's as easy as drilling a hole in the wrong place

WindJuggler

  • Newbie
  • *
  • Posts: 36
Re: Up and running
« Reply #2 on: March 09, 2009, 03:14:17 PM »
Hi,


It is 12m high and the raising went very smoothly. Lots of people to pusch and pull. I actually wanted to do it a little bit different but it was up before we knew.


The raising itself took about 1 minute.


Greetz

« Last Edit: March 09, 2009, 03:14:17 PM by WindJuggler »
Wim