Author Topic: SAHP's now running in base line mode...  (Read 2183 times)

0 Members and 1 Guest are viewing this topic.

fcfcfc

  • Sr. Member
  • ****
  • Posts: 252
SAHP's now running in base line mode...
« on: December 04, 2008, 12:17:12 PM »
Hi All:


For those interested in geo, my ground source heat pumps are now up and running in base line mode. The only solar assist at this point is the direct trench solar heating with the 3 flat plate collectors. The link below gives photos and details of the project over time....


Have Fun..!!!


http://www.s101470521.onlinehome.us/6928.html


.....Bill

« Last Edit: December 04, 2008, 12:17:12 PM by (unknown) »

A6D9

  • Full Member
  • ***
  • Posts: 108
Re: SAHP's now running in base line mode...
« Reply #1 on: December 04, 2008, 07:46:21 AM »
all i have to say is WOW  great job with all the data and process.


That is a killer set up.  you must be pretty proud to be so "Green"  :)


Wish I had the time and $$ to have a system like that.

« Last Edit: December 04, 2008, 07:46:21 AM by A6D9 »

LanceA0

  • Newbie
  • *
  • Posts: 26
Re: SAHP's now running in base line mode...
« Reply #2 on: December 20, 2008, 07:37:32 AM »
bill. that is awsome. thanks you for sharing.
« Last Edit: December 20, 2008, 07:37:32 AM by LanceA0 »

willib

  • SuperHero Member
  • ******
  • Posts: 2414
  • Country: us
Re: SAHP's now running in base line mode...
« Reply #3 on: April 08, 2009, 09:43:32 PM »
Very nice work .

Is that special geothermal tubing (in the ground)or would PEX work as well ?


Those evacuated tube collectors are awesome.

Does any fluid flow through them ? Or is there some other way to get the heat out ?


For the life of me i could not figure out what a LAT is?

.

.

.

« Last Edit: April 08, 2009, 09:43:32 PM by willib »
Carpe Ventum (Seize the Wind)