Author Topic: Ventless heater reccomendations  (Read 2150 times)

0 Members and 1 Guest are viewing this topic.

madlabs

  • Hero Member
  • *****
  • Posts: 686
  • Country: us
Ventless heater reccomendations
« on: October 01, 2009, 09:14:37 AM »
Hi All,


Winter is coming! Pretty cold in the mornings already. So,it's time to get a heater for my new space.


I am living in a 35' trailer, off the grid. I'm in Northern CA, so we get frost about 20-30 days a year, but that's about it.


I am looking at ventless heaters. I have read the warnings, so I will have my own CO and ODS sensors as well as the ODS on the heater. I will follow the venting reccomendations as well. What I'd like is some help with the following questions:


Blue flame or Radiant? I'm leaning towards blue flame, although they aren't legal in CA.


What Brand I want a high quality unit, no cheapies.


What Size? It's a small trailer. I'm thinking 6000 to 10,000 BTU's.


Thanks for the help!


Jonathan

« Last Edit: October 01, 2009, 09:14:37 AM by (unknown) »

hiker

  • Hero Member
  • *****
  • Posts: 1661
  • BIG DOG
Re: Ventless heater reccomendations
« Reply #1 on: October 01, 2009, 01:51:32 PM »
used one for years in my house-living room-

i liked the radiant heater the best--seems to throw the heat out farther..

burns cleaner than the flame type...had a co2 monitor it never did go off..

buy one with a built in thermostat...then set it and forget it....

hmm .. seems ive heard that phrase somewhere.....................

« Last Edit: October 01, 2009, 01:51:32 PM by hiker »
WILD in ALASKA

madlabs

  • Hero Member
  • *****
  • Posts: 686
  • Country: us
Re: Ventless heater reccomendations
« Reply #2 on: October 03, 2009, 07:30:02 AM »
What brand and size are you using?


Jonathan

« Last Edit: October 03, 2009, 07:30:02 AM by madlabs »

greend88

  • Newbie
  • *
  • Posts: 15
Re: Ventless heater reccomendations
« Reply #3 on: December 16, 2009, 06:57:55 AM »
Here's some BTU/hr figures for a 35'x10'x7'tall trailer.


35*10*7=2450 cu/ft              


Formula ( Btu/hr=Cubic Feet of air * Insulation)


 Insulation = (.2 = Excellent, .4 = Average, .8 = Poor, 2 = No Insulation.)


2450*.2= 490 btu/hr per degree Fahrenheit. That's for excellent insulation. Little to no leakage.


2450*.4= 980 btu/hr per degree Fahrenheit. For average insulation, average Leakage.


2450*.0.8= 1960btu/hr per degree Fahrenheit. For Poor insulation, loose leakage.


There's about a million other ways to figure this out too but gives a general idea of whats needed.


Lets say you have average insulation. So if you need a 30 degree temperature difference then you take 30*980=29,400 btu/hr.  So for 32*F - 62*F that's how many btu's you would need. I would say at least need a 18,000 Btu/hr heater.


But if you have REALLY good insulation you could get by with: 490*30= 14,700 Btu/hr.


But if it was me I'd get at least a 18,000 Btu/hr one.

« Last Edit: December 16, 2009, 06:57:55 AM by greend88 »