« previous next »
Pages: [1]   Go Down

Author Topic: 2 part epoxy  (Read 1006 times)

0 Members and 2 Guests are viewing this topic.

divemaster1963

  • Full Member
  • ***
  • Posts: 176
  • God bless them all
2 part epoxy
« on: March 14, 2009, 01:19:13 AM »
Hve have been looking localy for 2part slow sitting epoxy ot make my stator and mounting my mags. no one localy knows where to find it or what would be the best to use. any suggestions on where to find it and the apx cost.


thanks for the suggestions.

« Last Edit: March 14, 2009, 01:19:13 AM by (unknown) »
Logged

wdyasq

  • Hero Member
  • *****
  • Posts: 1324
Re: 2 part epoxy
« Reply #1 on: March 13, 2009, 07:33:38 PM »
Boat Building suppliers will have several brands. I have had good luck with Jamestown Distributors:


http://www.jamestowndistributors.com


I have used MAS, System3, WEST (Gougeon Brothers) and several others. I have favorites but any of the major brands work well.


Ron

« Last Edit: March 13, 2009, 07:33:38 PM by wdyasq »
Logged
"I like the Honey, but kill the bees"

vawtman

  • Hero Member
  • *****
  • Posts: 1425
Re: 2 part epoxy
« Reply #2 on: March 14, 2009, 06:53:56 AM »
Hello Divemaster,


 I used this stuff on my 54pl and worked awesome.


 http://www.fieldlines.com/story/2008/7/27/204224/519


Mark

« Last Edit: March 14, 2009, 06:53:56 AM by vawtman »
Logged

vawtman

  • Hero Member
  • *****
  • Posts: 1425
Re: 2 part epoxy
« Reply #3 on: March 14, 2009, 11:43:37 AM »
 Oh and one more tidbit, proper prepping for the bond is the single most important step no matter what you use.

« Last Edit: March 14, 2009, 11:43:37 AM by vawtman »
Logged

imsmooth

  • Sr. Member
  • ****
  • Posts: 425
Re: 2 part epoxy
« Reply #4 on: March 17, 2009, 09:57:10 PM »
I get mine from MAS Epoxy in New Jersey.  THey have a low and medium viscosity.

(888) 627-3769
« Last Edit: March 17, 2009, 09:57:10 PM by imsmooth »
Logged
Pages: [1]   Go Up
« previous next »