obala;
Seems interesting mix of panels you have there. Do you intend to have these charging batteries? then use during ALL day/night?
There may be a way to use ALL of them but a bit pricy even here in US.
A 24V MPPT controller such as Morning Star MPPT can take in up to 75Vdc from connected panels.
So you could connect the (2)30V panels in parallel connect the other 3 in series these (3) together would be up around 50Vdc, connect this (3) panel bank in parallel with the two 30Vdc panels, then single set of wires going to MPPT controller for 24V setup.
Setup battery bank for 24V and have a 24V inverter for items listed.
Actually would be better to have a few different controllers and inverters, the fridge, unless its a small solid state unit, will likely need one by itself.
I realize the voltages will not be exact and when paralleling 30Vdc with ~50Vdc will draw the bank down to an average somewhere in between, BUT this will allow you to use all 5 panels and with the wattage ratings they seem to have; it would be a waste to leave any of the panels alone.
You could of course use the 30Vdc 180 watt panels together with a 24V system for running the fridge then use a dirrerent controller for 12Vdc to run All other devices.
Really depends on what you can source there and amount of money you're willing to devote to the system.
Best of Luck;
Bruce S