Oil sucks, wind blows.
0 Members and 1 Guest are viewing this topic.
What I need is an inexpensive source of mating connectors. I've been using large alligator clips for charging and experimentation, but would like to have a cleaner arrangement for permanent installation into a renewable-powered workshop and Ham shack.
I drilled and taped mine for 1/4-20 threds. I used a brass washer between the copper bus barr.
The bar is held to the battery post with 1/2" long 1/4- 20 brass bolts. This has been working great now for several years.
This is a 48 volt system.
JK TAS Jerry
Martin
I assume this means that the terminal posts are solid, not hollow?
Anderson power products makes many specialized high current connectors; chances are good that they would have something like that.
Yep they are solid not hollow.