I am just starting to build my solar and wind setup and need some help, this is a first for me and I have drawn up a wiring diagram of what I want to build.
- Does the wiring look to be correct?
- I think the wind volt meter in this set up would read the battery voltage and not that coming from the wind gen , Should I put a diode between the battery and the wind gen volt meter so that it reads only the volts from the wind generator?
- The load regulator on the battery should it be wired through the shunt for the emeter
The Solar regulator is a plasmatronics 24 volt it has three wires 1 for solar - input , 1 for - Battery and the last is for +solar and Battery combined
Solar Panel is a 24 volt 165watt panel
Wind gen is 800watt made by Mikes windmill shop
Any help would be greatly appreciated.
Diagram is here http://www.geocities.com/eraser1.geo/setup.jpg