« previous next »
Pages: [1]   Go Down

Author Topic: Looking for this part  (Read 824 times)

0 Members and 1 Guest are viewing this topic.

Matrix1000

  • Full Member
  • ***
  • Posts: 108
Looking for this part
« on: July 25, 2004, 10:05:15 PM »
I'm looking for a hub extension for a servo motor that will allow me to mount a turbine to a servo motor. Anyone know where I can get one and what they're called :P


Thanks



« Last Edit: July 25, 2004, 10:05:15 PM by (unknown) »
Logged

TomW

  • Super Hero Member Plus
  • *******
  • Posts: 5130
  • Country: us
Re: Looking for this part
« Reply #1 on: July 25, 2004, 10:30:22 PM »



I've only posted this info 4 or 5 times.


$1.99 each at hardware freight in left or right hand thread and 5/8 or 1/2 inch shaft sizes. TDM takes 5/8 on the 30 and 40 volt models anyway.

« Last Edit: July 25, 2004, 10:30:22 PM by TomW »
Logged

Walt

  • Jr. Member
  • **
  • Posts: 66
Re: Looking for this part
« Reply #2 on: July 26, 2004, 11:24:07 AM »
I think that Tom meant Harbour Freight, if not Harbour Freight has them.

Walt
« Last Edit: July 26, 2004, 11:24:07 AM by Walt »
Logged

BrianK

  • Full Member
  • ***
  • Posts: 106
Re: Looking for this part
« Reply #3 on: July 26, 2004, 08:38:06 PM »
those parts sold as a adapter for a motor to become a grinder or a buffer.


    .

« Last Edit: July 26, 2004, 08:38:06 PM by BrianK »
Logged

eformx

  • Newbie
  • *
  • Posts: 18
Re: Looking for this part
« Reply #4 on: July 26, 2004, 10:05:30 PM »
They are called a Shaft Adapter.  Try SurplusCenter.com or if you are in Canada and want to pick one up quickly then try Lee Valley for a 5/8" Shaft Adapter.  


Rob

« Last Edit: July 26, 2004, 10:05:30 PM by eformx »
Logged
Pages: [1]   Go Up
« previous next »