Hub pics for Hiker

[Jerry]

If these pictures load they are simular to Hikers wood hub. There is also a 3 blade triangle hub with plastic blades. Well here goes?

                      JK TAS Jerry

[hiker]

looks great...

i used  a hand saw to cut mine out-and a drill bit at the bottom of each slot..

what type of tool did you use to get that flat bottom in each slot??

[hiker]

heres a shot of mine--

much to big for the back of my motor  home!!

it was just a test for a geared up alt..

went back to using my single 7 ft. blade..

works great now..once i found out the mounting

hole was drilled at a angle-caused the the mill to

go back and forth--really cranks up now--next i"ll

offset the mount so it will turn out of the wind..