« previous next »
Pages: [1]   Go Down

Author Topic: #10 bolts  (Read 1133 times)

0 Members and 1 Guest are viewing this topic.

domwild

  • Sr. Member
  • ****
  • Posts: 357
#10 bolts
« on: October 05, 2004, 08:37:10 PM »
Not being an imperial person, could someone give me the thread diameter in inches or mm of a #10 bolt? Us Aussies are metric!

Dominic

« Last Edit: October 05, 2004, 08:37:10 PM by (unknown) »
Logged

Harry Luubovv

  • Jr. Member
  • **
  • Posts: 98
Re: #10 bolts
« Reply #1 on: October 05, 2004, 08:47:44 PM »
The American-standard #10 bolt that I always use are the equivalent of four and a half millimeter diameter. TO be sure like you wanted it be, I just checked one of the bolts against a measuring tape. But I don't think it has to be that critical, anything near sizes can do I supposed. But I can be wrong too.


Have a jolly day mate,

Harry Luubovv.

« Last Edit: October 05, 2004, 08:47:44 PM by Harry Luubovv »
Logged

nack

  • Jr. Member
  • **
  • Posts: 65
Re: #10 bolts
« Reply #2 on: October 05, 2004, 08:48:25 PM »
First post!
« Last Edit: October 05, 2004, 08:48:25 PM by nack »
Logged

nack

  • Jr. Member
  • **
  • Posts: 65
Re: #10 bolts
« Reply #3 on: October 05, 2004, 08:51:25 PM »
Sorry, I thought for a second that this was slashdot.  SAE bolts go into number sizes below 1/4" diameter.  Here is a table that has the details http://euler9.tripod.com/bolt-database/33.html
« Last Edit: October 05, 2004, 08:51:25 PM by nack »
Logged

domwild

  • Sr. Member
  • ****
  • Posts: 357
Re: #10 bolts
« Reply #4 on: October 06, 2004, 07:59:35 PM »
Thanks for help! Thanks also go to Jerry of Jerry blades with Mike Mods who has also answered this question.


Dominic

« Last Edit: October 06, 2004, 07:59:35 PM by domwild »
Logged
Pages: [1]   Go Up
« previous next »