I would recommend....
- Using your finger to quench the spark by placing it in between the contacts.
-
2 (25%)
- Blowing it out using a soda straw should work best.
- 0 (0%)
- Stand on a rubber mat and pour water on it to see if that will work.
- 0 (0%)
- Use large knife switches with 2 foot long handles on all your electric drills
-
1 (12.5%)
- That's what they designed HexMosFets for silly !
-
1 (12.5%)
- It seems potentially like too much potential to me !
- 0 (0%)
- Wear Electrician HV rubber gloves at all times while using power tools.
- 0 (0%)
- Getting someone else to turn things off and on would be the safest.
-
2 (25%)
- Roasting hot dogs on the switch until it cools down is the most effecient.
-
1 (12.5%)
- Rubber switches that stretch the contacts apart for greater separation.
-
1 (12.5%)
Total Members Voted: 0