Time to share my new system.
Consists of 4Kw of BP solar panels feeding two Outback FLEX max 60 MPPT , the battery bank is 48V of Century Yuasa 4v batteries 1320 amp hour
The inverter is a Selectronic SP PRO 7.5Kw @ 25degC 6Kw @ 50deg C, need a computer to program it, can make your toast in the morning schedule reticulation, is grid interactive (no grid) starts the generator when it needs to actually it does everything but assure me that I am smarter than it.
It supplies our new house, which we have yet to move into, there is no wind turbine yet, the panels are rigid mounted, one of the installers told me that tracking is a wives tail, needless to say I did not bother to educate him. he and his mate could not even get the panels lined up in a straight line.
The back up generator is a 27Kva 3 phase Perkins motor Stamford generator, OK a bit big for the job but I own it. If it gets used enough to glaze up the cylinders then it's a Sunday afternoon project to overhaul the cylinders, so simple on Perkins.
Until we start living in the house I don't know how well it will go. it ties into the Fruit packing shed system (yes Tom fruity allan), basically I don't know where the most generation will be needed yet. There are serious efficiency considerations to take into account with the link which is not what I expected, transfer capacity is 3+Kw.
Interesting first post only captured one pic, worked fine before this board went live, maybe it was because I put ten pics in (the max), anyway enjoy
regards Allan