I am testing my dual rotor with test coils. I am currently using 16g wire since that is what I have but will probably order 14g for the final build. Anyway I do not have any info on the magnets I have so I was wondering if someone could tell me what type of numbers this one coil should be giving.
I have
Dual rotor 12 magnets per rotor(the wedge magnets Ed sells)
The rotors are 10 inches and there is approx on average 3/4 inch between magnets
Hand spinning
Coil center is the size of the magnet
Coil is the shape of the magnet
Legs are approx 3/4 inch filling the space between magnets
I am getting 3.5V DC and approx 1 amp (using 50 DC bulb)
I am aiming to use 6 coils per phase and 3 phase.
thanks for any comments.