« previous next »
Pages: [1]   Go Down

Author Topic: Motor conversion pix for Mike.  (Read 863 times)

0 Members and 1 Guest are viewing this topic.

Jerry

  • Hero Member
  • *****
  • Posts: 1519
Motor conversion pix for Mike.
« on: January 26, 2006, 03:49:06 AM »
The post was. 100 watts $8. http:www.fieldlines.com/story/2004/1/28/044/80810.


This story was just about a 100 watt motor conversion. The doaner motor GE 1/4hp, 825 rpm, 230 vac, 8 pole single phase.


8 Lowes $1 ceramic magnets were used on a home built armature. At the time I didn't take any pictures of this alt. I still have the alt and took a couple pix last night.








                        JK TAS Jerry

« Last Edit: January 26, 2006, 03:49:06 AM by (unknown) »
Logged

Kwazai

  • Full Member
  • ***
  • Posts: 231
  • Country: us
Re: Motor conversion pix for Mike.
« Reply #1 on: January 27, 2006, 07:01:28 AM »
THANX.

a close friend and I make frequent trips to cash in scrap, motors are typically part of it (computer parts, pipe, car parts, etc. etc....$).

Mike
« Last Edit: January 27, 2006, 07:01:28 AM by (unknown) »
Logged
Pages: [1]   Go Up
« previous next »