SparWeb,
The cut in speed for the motor I wanted to try is around
167 rpm for 13.2 volts, but wanted it to also maybe work
on the larger motor 183 rpm. I have seen over 80 amps
out of it. The name plate list 65 amps I try to stay below
that now that I got the furling working properly.
The 97 rpm motors will probably work nicely at 24 volt.
Around 188 rpm for 25.2 volt. So the large cord at the
root, 11 inches and the faster tip 3 1/2 inches, with no
angle for drag,more lift, might be OK. I hope so it came
out beautifully.