Greetings, I was thinking about my less post and I may have misspoke. I made some test coils using 22 AWG.
1 in hand @ 200 turns output @ 200 RPM = 1.3 VAC
2 in hand @ 100 turns output @ 200 RPM = 0.7 VAC
4 in hand @ 50 turns output@ 200 RPM = 0.3 VAC
8 in hand @ 25 turns output@ 200 RPM = 0.16 VAC
I apologize to the forum and anyone reading my last post.
Project update:
Fabrication method established.
Currently fabricating new blade rotor assembly.
6 inch diameter is to small for direct drive, will require gearbox or a belt or chain drive.
The best test results was with the 8 inch PMA. Adding third stator to 3 phase configuration.
Enjoy the day.