Related to AA powered:
It has been a while since I went through everything commonly available, or commonly available here.
The only motion sensor night lights I recall that save any noticable power when off are the type with the daytime sensor.
And the best versions had a few primary issues, when related to LEDs.
#1- The 3-way (On/Off/Auto) switch had a different voltage to the bulb when in Auto than On. 1V is a pretty serious difference when starting with 6V max, and a white 3.2V LED.
#2- The bulb socket could have been wired either polarity.
#3- A large percentage did not work from the factory, and that was when I was purchasing them direct in very large quantities.
#4- The better ones cost a lot more than the cheapies, but its not really possible to tell which expensive one is good until after you bought it.
#5- The company(s) I delbt with have taken to going with the lowest Chinese based bidder, and the PCBs and circuitry are not the same from one batch to the next.
#6- The factory made versions are less costly than they used to be, and there is a reason for that.
Wow.
Looks like more than a few reasons.
(back to VISTA)
G-