Hello everyone!
I want to know about the output of my turbine with following ingredients.
• I have one plate of 12 n40 magnets 2in long 1 in width and 1/2in thick and second plate of my magnets are 2in long 1 in width and 1/4in thick.(how much this effect my efficiency?)
• 18# wire with 128 turns per coil. (All you people recommend any gauge of wire for higher amps)
• 3 phase 9 coils with star configuration.
• I want to make 14 volt for my 12 volt battery.(14 for make a good difference for current to go inside the battery)
• I want to make it for 20 to 25 amps.
• I am going to use this alternator as a pedal generator.
• How long it will take to charge 125AH battery with 50% efficiency.
• What should I do if you people suggest me 24 or 48 volt instead of 12volts?
• I have a 1000 watt inverter 12 volt to 220 volts.
I want suggestion from all of you expert people and those who done this ever. My plane is to increase amps standing at 12 volt battery.