~SOLD~ PM motors for trade. ~SOLD~

[Elby]

I've been parting out / junking some CNC Machines and I saved the PM servo motors and one BIGGUN of a drive motor. I would prefer not to sell them, but would like to trade them out for stuff that might further me on my way. Solar panels are high on that list, all I have right now is a c-band mount, with drive motors and I'm hooking up my redrok tracker in the little spare time I do have. I don't have any other parts set aside right now, but neither can I say exactly what I need.

I am assuming that most of these servo motors are AC, but all are PM. I have a few that are not pictured as well. If there's interest I can get more info and / or test as desired.




This one is DC and about the size and weight of a car engine. For the sake of scale, it's setting in a Ford Ranger. It uses 6 V-belts, and I saved the driven pulley as well.

My close up photography sucks and is pretty much unreadable.
So the tag looks like this:

FUJI Electric
DC Motor
Output      11KW          15KW              Type       GHP6166 A
Volt                     220                         Rule        JEM1170
AMP          57               78                   Insul.      F
RPM          1150     /     3500
EXCIT.            SEP.  150V                    Brg COM.M.S.  6212ZZ
                      3.4 / 1 A                      Brg ANTI. C.S.  6312ZZ
Rating   Cont   30min
                      50%
Serial # M1061667 Y 2

I'm located in South Central Kansas in the countryside. But I'm close to Wellington Ks. ( 30 mins. south of Wichita. )

[Elby]

Oops. Forgot....
One smaller thing I'd be interested in is a stator winding for a GM alternator (wind blue or equivalent).
I know they don't make much, but I got a half-built, thrice crashed windmill that I wouldn't mind getting back up for another try.

[Elby]

Sold, gone.

[Bruce S]

Sold, gone.

Elby, thanks for the update, I'm locking this post then.
Cheers;
Bruce S