Oil sucks, wind blows.
0 Members and 1 Guest are viewing this topic.
Adapted ceiling fans . The end caps are needing some jacking screws . The rotor I'm hammering out of Flatbar . I have some different circuitry for this unit and is wound for three phase . The inner is the second phase . It's compact . Not completely weather proof yet.
28 volts at 20 amps amps is the target I should be good there . over all turns per phase is 8 coils in phase 1 and 3 25 turns bifillar and 25 turns on phase 2 trifillar 16 coils counter wound