For Sale.....3kW & 5kW wind turbine PMG's and blade sets
I collected these in my travels around Europe, they are new/unused and were manufactured by Yangzhou Shenzhou.
I was going to Hugh Piggott'fy these Yangzhou PMG's, but sadly I have lots of other urgent jobs that need sorting out, and my time is precious.
I suggest that the PMG bearings are replaced, and the blade mounting system is beefed up.
This One called 3kW PMG, is 32kg/70lbs and is 48v output type. I can include a blade mounting hub, and the steel tail boom, and a nose cone.
Price is £185 GBPThis One so called 5kW PMG, is over 140kgs/300lbs and is for grid tie. I can include a nose cone for this.
Price is £200 GBP.Blades.
2 sets of 3off matching 5kW blades. Fiberglass, and each blade is 2380mm/ 8 foot long. (16 footer).
Price for each set of 3off matched blades is £150 GBP. 1 set of 3off matching blades for the 3kW. Fiberglass, and each blade is 1980mm/ 6ft 6inch long. (13 footer).
Price for the matching set of 3 blades is £150 GBP.1 set of 3 matching blades for the 3kW. Fiberglass, and each blade is 1870mm/ 6ft long. (12 footer).
Price for the matching set of 3 blades is £150 GBP.Note.....The mould on the right of the above picture is for my own Hugh Piggott design of blades, it is not for sale.
I will not send or arrange for transport.
I am in Normandy France, and can offer Gite accommodation for a couple of nights if that helps when you come and collect.
I will be traveling to the UK the end week in October and could deliver/meet somewhere in the centre of England if that helps?.
Please PM if you are interested in these.
Thanks.