Hi
I have a 2Kw inverter generator. Every thing works in it, smart throttle clean stable output. Until... It hasn't been used for a few months. Then you get no output, sometimes it will kick in after 15 mins or so. I assumed it is a synchronous alternator and need a kick to start it. I have found (can't get to the throttle) plug the load in, switch the smart throttle off so it runs at 3000 RPM push the choke on for a few seconds then snap it back off the engine momentary over revs and after doing this a couple of times it kicks in and you hear the load come onto the engine. perfect again, until its stored for a few months.
Brian