« previous next »
Pages: [1]   Go Down

Author Topic: BMS for Lipo  (Read 2349 times)

0 Members and 1 Guest are viewing this topic.

Eirbyte

  • Newbie
  • *
  • Posts: 49
  • Country: ie
    • Build Your Own Wind Turbine
BMS for Lipo
« on: March 04, 2019, 09:15:16 AM »
Hi,
 I have been given 84 CALB 90ah Lipo cells 3.2v each from a electric car.
They are eight years old and I would like to use them to make a 48v pack for our offgrid home. 
So the question is dos anyone know where I could get a BMS for this or am I wasting my time.
Logged

Simen

  • Sr. Member
  • ****
  • Posts: 479
  • Country: no
  • Grimstad, Norway
Re: BMS for Lipo
« Reply #1 on: March 04, 2019, 03:57:01 PM »
Don't know where in the world you are, but here are one example: https://www.ev-power.eu/Battery-Management/BMS123-Smart/
Logged
I will accept the rules that you feel necessary to your freedom. I am free, no matter what rules surround me. If I find them tolerable, I tolerate them; if I find them too obnoxious, I break them. I am free because I know that I alone am morally responsible for everything I do. - (R. A. Heinlein)

SparWeb

  • Global Moderator
  • Super Hero Member Plus
  • *****
  • Posts: 5452
  • Country: ca
    • Wind Turbine Project Field Notes
Re: BMS for Lipo
« Reply #2 on: March 04, 2019, 10:25:14 PM »
Eirbyte's profile says "Ireland", so your link to ev-power is probably good, Simen.

Logged
No one believes the theory except the one who developed it. Everyone believes the experiment except the one who ran it.
System spec: 135w BP multicrystalline panels, Xantrex C40, DIY 10ft (3m) diameter wind turbine, Tri-Star TS60, 800AH x 24V AGM Battery, Xantrex SW4024
www.sparweb.ca

Simen

  • Sr. Member
  • ****
  • Posts: 479
  • Country: no
  • Grimstad, Norway
Re: BMS for Lipo
« Reply #3 on: March 04, 2019, 11:47:30 PM »
Ah, didn't think of checking his profile. ;)

Never tried that BMS123 system, but it seems nice. I've shopped some smaller BMS/SBM from them that works fine, so the company are good enough, i guess... ;)
« Last Edit: March 05, 2019, 12:04:31 AM by Simen »
Logged
I will accept the rules that you feel necessary to your freedom. I am free, no matter what rules surround me. If I find them tolerable, I tolerate them; if I find them too obnoxious, I break them. I am free because I know that I alone am morally responsible for everything I do. - (R. A. Heinlein)

Eirbyte

  • Newbie
  • *
  • Posts: 49
  • Country: ie
    • Build Your Own Wind Turbine
Re: BMS for Lipo
« Reply #4 on: March 05, 2019, 05:13:49 AM »
Quote from: Simen on March 04, 2019, 03:57:01 PM
Don't know where in the world you are, but here are one example: https://www.ev-power.eu/Battery-Management/BMS123-Smart/

Thanks interesting site. I ordered one for 12v to try it out in the camper van first.
Logged

Simen

  • Sr. Member
  • ****
  • Posts: 479
  • Country: no
  • Grimstad, Norway
Re: BMS for Lipo
« Reply #5 on: March 06, 2019, 12:35:12 AM »
Quote from: Eirbyte on March 05, 2019, 05:13:49 AM
Quote from: Simen on March 04, 2019, 03:57:01 PM
Don't know where in the world you are, but here are one example: https://www.ev-power.eu/Battery-Management/BMS123-Smart/

Thanks interesting site. I ordered one for 12v to try it out in the camper van first.

The BMS123 kit? or one of the simple SBM? Please, do report back on how it works. :)
Logged
I will accept the rules that you feel necessary to your freedom. I am free, no matter what rules surround me. If I find them tolerable, I tolerate them; if I find them too obnoxious, I break them. I am free because I know that I alone am morally responsible for everything I do. - (R. A. Heinlein)

XeonPony

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 901
  • Country: ca
  • Sanity is over rated!
Re: BMS for Lipo
« Reply #6 on: March 17, 2019, 10:42:27 AM »
Logged
Ignorance is not bliss, You may not know there is a semie behind you but you'll still be a hood ornimant!

Nothing fails like prayer, Two hands clasped in work will achieve more in a minute then a billion will in a melenia in prayer. In other words go out and do some real good by helping!
Pages: [1]   Go Up
« previous next »