I have been winding some stators that I pulled out of DVD burners ( really cute 9-12 pole ).
And now im moving on to creating my own little axial flux generator ( 6 coil )
My first set of coils I wound I decided are waaay to teensy
( in gauge of wire, size and # of turns )
Soooo my current set I decided to use 5 strands of 0.33mm wiire and made 6 coils with 60 turns using
5 strands of 0.33mm wire! And I just learned that there is a direction that the coils need to be wound!
Seems like one coil goes left, than the next goes right, and back and forth.
Does this make a massive difference if I follow this rule or not? I dont see anything in alot of the materials im
reading about this.
Can anyone please explain this to me?
thank you!