Hi there ,
I am little bit stuck ......so .. i am trying to build one axial generator . i am using N52 with diameter of 50x20x10 .
For rotor i wanna use 12 magnets x2 24 . the distance between magnets in lower side have to be same with magnets what is 20 mm in my case . so 12 x2 = 24 . so go on the rotor start the came up .
now .... what can be the thickness of the rotor same like the magnets ? that mean 10 mm ?
And about stator . i need 48 v ( 24 can do the job but i really need 48 ) how yo i calculate the stator ?
Thanks for ideas and apologize for my poor english .
Greetings from Germany / Warmsen.