hi, iam a newbe trying to figure some of this stuff out and wondering if someone can take a look at my pics. to see if iam on the right track. The rotor is 7" with 12-1"x 1"x1/2 magnets,with a 1/2" space between, Dual rotors.
The stator is 8" with 9 coils, with 1/2" legs and 1" holes.
I made some test coils from some telephone wire i had laying around with a core of
.025 and a outside of 0.065. i was able to get 50-55 wrapes in a coil to fit in my
pattern. Was wondering if i use some #18 (0.040) that i can get maybe 100 or so on them. But i really dont know how many i might need.
I would like to try to get a 175-200 cut in speed.
what i would like to use it for is to charge a 12v big 8D gell filled battery that i have, with a 2400watt brutus inverter that i am using to run my light & small tools in the shop. The only problem is iam cheap and dont have a good blade
to use. The one that i have is 28" fiberglass hub fan off a tractor trailer.
The blade is really stiff and dont think it will flex at all. I was able to get
193 rpm with 8mph wind mounted on a shaft one day. A little help from someone
would be great, before i buy magnet & wire. Also what kind of watts do you think
that i might get?
thank you,
charles