Author Topic: 10 mph winds  (Read 819 times)

0 Members and 1 Guest are viewing this topic.

simp

  • Newbie
  • *
  • Posts: 3
10 mph winds
« on: January 27, 2007, 05:11:32 PM »
my mini gen rewound with microwave transformer wire. figures from last night, 2 12 volt batts hooked together batt volts were 11.89, #s from gen 12.78 volts dc and over 800 miliamps. Not to bad for 20 inch box fan blades!!  
« Last Edit: January 27, 2007, 05:11:32 PM by (unknown) »

s4w2099

  • Full Member
  • ***
  • Posts: 234
Re: 10 mph winds
« Reply #1 on: January 27, 2007, 08:49:01 PM »
Any pics my friend?



I have tried to make a small one myself but I was not able to get anything more than 5 Watts of power from them.



the rotor I used is 4 inches 12 pole 3 phase alt.

« Last Edit: January 27, 2007, 08:49:01 PM by s4w2099 »

willib

  • SuperHero Member
  • ******
  • Posts: 2414
  • Country: us
Re: 10 mph winds
« Reply #2 on: January 28, 2007, 04:08:09 PM »
sounds like you are having fun

good going
« Last Edit: January 28, 2007, 04:08:09 PM by willib »
Carpe Ventum (Seize the Wind)