« previous next »
Pages: [1]   Go Down

Author Topic: Tower work  (Read 2051 times)

0 Members and 1 Guest are viewing this topic.

quest0111

  • Newbie
  • *
  • Posts: 9
Tower work
« on: May 10, 2009, 11:22:08 AM »
Been working on 75' tilt down tower. Almost ready to go. Had 50 mph gust yesterday while putting up gin pole. Want to test raise tomorrow. Tower is for Dan built 10'  



« Last Edit: May 10, 2009, 11:22:08 AM by (unknown) »
Logged

Janne

  • Full Member
  • ***
  • Posts: 244
  • Country: fi
  • Turbiini
    • My image gallery
Re: Tower work
« Reply #1 on: May 10, 2009, 07:56:49 AM »
Looks like a job well done.. I bet you can't wait to have the turbine running atop of it :)
« Last Edit: May 10, 2009, 07:56:49 AM by Janne »
Logged
Nothing's as easy as drilling a hole in the wrong place

DanB

  • Global Moderator
  • SuperHero Member
  • *****
  • Posts: 2153
  • Country: us
    • otherpower.com
Re: Tower work
« Reply #2 on: May 11, 2009, 09:43:31 AM »
Curious just exactly what material you used for the tower?
« Last Edit: May 11, 2009, 09:43:31 AM by DanB »
Logged
If I ever figure out what's in the box then maybe I can think outside of it.

quest0111

  • Newbie
  • *
  • Posts: 9
Re: Tower work
« Reply #3 on: May 11, 2009, 06:41:30 PM »
5" sch 40 with 6" sch 80 for coulpings. Turbine is up and going...will show pics tomorrow. Lot of fun and totally off grid!
« Last Edit: May 11, 2009, 06:41:30 PM by quest0111 »
Logged

quest0111

  • Newbie
  • *
  • Posts: 9
Re: Tower work
« Reply #4 on: May 11, 2009, 06:57:13 PM »
I used 42' sections for less joints. 42' + 21' + 7' from gin pole (42 - 35 = 7) total about 75'
« Last Edit: May 11, 2009, 06:57:13 PM by quest0111 »
Logged

quest0111

  • Newbie
  • *
  • Posts: 9
Re: Tower work
« Reply #5 on: May 12, 2009, 04:15:37 AM »






« Last Edit: May 12, 2009, 04:15:37 AM by quest0111 »
Logged

bzrqmy

  • Full Member
  • ***
  • Posts: 122
Re: Tower work
« Reply #6 on: May 12, 2009, 10:12:22 AM »
The blades can change color.  That is a cool trick!
« Last Edit: May 12, 2009, 10:12:22 AM by bzrqmy »
Logged

TomW

  • Super Hero Member Plus
  • *******
  • Posts: 5130
  • Country: us
Re: Tower work
« Reply #7 on: May 12, 2009, 10:42:38 AM »
I just figured the color change was doppler shift due to the speed of the prop? Hehe.


Tom

« Last Edit: May 12, 2009, 10:42:38 AM by TomW »
Logged

jmk

  • Hero Member
  • *****
  • Posts: 603
Re: Tower work
« Reply #8 on: May 16, 2009, 01:27:00 PM »
 Nice set up. How is it that the blades change color?
« Last Edit: May 16, 2009, 01:27:00 PM by jmk »
Logged
Pages: [1]   Go Up
« previous next »