« previous next »
Pages: [1]   Go Down

Author Topic: New VAWT 3 phase  (Read 1581 times)

0 Members and 1 Guest are viewing this topic.

(unknown)

  • Guest
New VAWT 3 phase
« on: August 06, 2009, 04:36:27 AM »
Photo of drive plates





I start testing in the morning


Link to video:

http://www.youtube.com/watch?v=kUenwVkURuI



big old honken pic 1

i had to make that one photo a link it is huge also fixed your photo html on the first one so it displays properly remember less than 640 x 480 pixels and less than 150KB.
Kurt
« Last Edit: August 06, 2009, 04:36:27 AM by (unknown) »
Logged

KilroyOdin

  • Guest
Re: New VAWT 3 phase
« Reply #1 on: August 06, 2009, 04:03:07 AM »
Thanks, I tried to resize, it looked small during the preview. Thanks again and best regards
« Last Edit: August 06, 2009, 04:03:07 AM by KilroyOdin »
Logged

jaskiainen

  • Full Member
  • ***
  • Posts: 102
Re: New VAWT 3 phase
« Reply #2 on: August 06, 2009, 08:48:03 AM »
Hi Odin


Looks nice! Just post some stats when you get them...

« Last Edit: August 06, 2009, 08:48:03 AM by jaskiainen »
Logged

kurt

  • Hero Member
  • *****
  • Posts: 925
  • Country: us
    • website
Re: New VAWT 3 phase
« Reply #3 on: August 06, 2009, 11:35:17 AM »
that second photo is so large pixel wise over 3000 pixels wide that even when i did right click view image Firefox could not display it full size like it normally would was very odd.
« Last Edit: August 06, 2009, 11:35:17 AM by kurt »
Logged

KilroyOdin

  • Guest
Re: New VAWT 3 phase
« Reply #4 on: August 06, 2009, 05:22:26 PM »
Hi, I posted a video in my Diary "VAWT Road Test". The blade design never reached a RPM high enough to produce a expectable output from the alternator.  I have to reconfigure the alternator for a higher output at a lower RPM. Thanks for the interest. Best Regards
« Last Edit: August 06, 2009, 05:22:26 PM by KilroyOdin »
Logged
Pages: [1]   Go Up
« previous next »