Author Topic: magnet question  (Read 788 times)

0 Members and 1 Guest are viewing this topic.

mikern

  • Newbie
  • *
  • Posts: 6
magnet question
« on: January 07, 2008, 07:36:39 AM »
Can the round magnets from microwave ovens be used in place of the neo magnets for the wind gens built here? I'd think that would lessen the cost to build, if they'd work. thanks Mike
« Last Edit: January 07, 2008, 07:36:39 AM by (unknown) »

hiker

  • Hero Member
  • *****
  • Posts: 1661
  • BIG DOG
Re: magnet question
« Reply #1 on: January 07, 2008, 12:57:40 AM »
thier ceramic mags--would work--but you would need to use big wire with a few more turns than what a neo powered gen would use...

if size is not a issiue --then go for it..

its been done here before--i belive shadow built one..jerry built a ceramic powered

gen[300watts]--i built a few myself..neoes are really the way to go-power wise..

heres a 12"dual rotor mill[ceramic powered] i did a long while back--it fell off the back of my motorhome-before i had a chance to really check it out.....

« Last Edit: January 07, 2008, 12:57:40 AM by hiker »
WILD in ALASKA

wooferhound

  • SuperHero Member
  • ******
  • Posts: 2288
  • Country: us
  • Huntsville Alabama U.S.A.
    • Woofer Hound Sound & Lighting Rentals
« Last Edit: January 07, 2008, 01:11:05 AM by wooferhound »