View full version: Newbies
  1. quad rotor
  2. Double-Coil Electromagnets?
  3. new and SOLAR LOVING
  4. WindStart
  5. Inverter paralleled with grid
  6. sizeing charge controller
  7. squirrel cage fan idea?
  8. Peru - NACA 4415 blade profiles - Wood instead of Fiberglass??
  9. Bowed Blades - Asset or Liability
  10. water wheel design
  11. Counter Rotation
  12. New genny pics
  13. Battery charger for wind turbines
  14. flux windings in stator
  15. 72 volt mill
  16. alternator pics
  17. Dual rotor results
  18. Been reading about batteries.
  19. Sheet Metal for use in Mag. Rotors?
  20. wind power
  21. turbine charging.
  22. Electric Vehicle Cost to operate?
  23. 130VDC PM treadmill motor
  24. Gottigen blades
  25. new & in need of some help !
  26. Aluminum coils
  27. building a 17ft wind generator
  28. Dual rotor efficiency
  29. vawt solidity governor? bad idea?
  30. how many batteries?
  31. 12 volt rv light bulb 24v bank?
  32. Charger Controller
  33. Pedal-Powered (Vacuum) Zeolite Refrigerator
  34. Finding Positive
  35. RPM vs. blade diameter and pitch
  36. Can I use a 24 volt charge controller with a 48 volt windturbine
  37. when to use AC vs DC
  38. New to forum
  39. wind gen using an argord 2.5hp motor
  40. Amatek Motors used in what brand tape drives?
  41. Discharge/Charge cycle
  42. Load and Inverters
  43. VAWT VS. HAWT
  44. stator wire size and current capacity
  45. brushless?
  46. Coil Cogging issues
  47. Wood stove thermogenerator?
  48. Newbie: Lots of questions... Charge Controller
  49. Charge Control Configuration Help Needed Badly [CLOSED]
  50. Blade RPM