If there is any information, leads or drawings/schematics that anyone can share I would be SO much appreciative!!!
Here is a piece of my "proposal" I handed into instructors and had approved. Please anyone with info to offer would be needed and appreciated, thanks in advance!!
In this report I intend to research and report what it takes to get power from the wind turbine to the grid by answering the associated questions:
Protection. What protection is used for the generator, the grid and everything in between? Because the wind turbines are so high from the ground they are susceptible to lightning strikes; surge protection would be a desirable investment. I also intend to research what types of relays are involved and what they would protect against. In addition, I expect to research information on other forms of protection involved and report my results.
Control. What instruments are involved in controlling the system? Due to the unreliability of wind, a variable speed controller would be ideal. I intend to explore what instruments are needed for controlling the system.
Metering. What is used to monitor the system? Knowing the wind speed would be convenient for this unreliable source. I propose to investigate what type of monitoring and metering is required for wind power.
Thank you so much for reading this and I hope to get lots of feedback! THANKS!!
please keep things on one topic all in one story use the post reply or reply to this buttons to add content to your story i removed your two other stories that were in other sections.
Kurt