View full version: Wind
  1. PCV Blades - Large 630mm 18mm wall Pipe - Question
  2. Wind turbines and Geocache
  3. Question for Underground Lightning Ground regarding stator design
  4. Question about Stator
  5. 55W PMA: almost no output??
  6. High winds, tornado warnings, lightning
  7. Report KD 654 about the VIRYA-3.6PC available
  8. Bergey XL-1 with a Missouri dump load???
  9. report KD 501 about moment coefficient of cambered airfoils made public
  10. DELTA wiring a mini windmill how ?
  11. May I use hexagonal prismatic permanent magnets to build a wind generator,pse?
  12. NANO 4 Relay Wind Dump Load With Delay
  13. Question remote generating/pumping.
  14. OpenAFPM: An open source software tool for designing AFPM generators
  15. The Zubbly files
  16. gear box study
  17. Free energy 4kw
  18. Help needed on a Breezy type grid tied induction turbine
  19. Freelites
  20. Windtronics turbine.
  21. March 19 Workshop
  22. main shaft and hub study
  23. Torque value on blade design
  24. Once again in 3-part (phase) harmony
  25. Wind and PV make compatible bedfellows
  26. Power factor correction capacitors used on wind turbine PMA's
  27. F&P stators are >82% efficient as a PMA.
  28. Any turbine owners in the Midlands, UK?
  29. report KD 595 reviewed
  30. Kragten Design no longer a commercial company
  31. Tip speed ratio of GOE 222 blades
  32. charging using a small wind turbine
  33. Report KD 562 and KD 576 available
  34. using a computer fan as a wind generator
  35. Antique Wind Generators - Western Canada on Facebook
  36. reports KD 648 and KD 484 available
  37. Jacobs generator - low/no voltage
  38. Power Furling Revisited
  39. My "new to me" old Jacobs 110 volt 3000 watt wind generator
  40. Halbach Array?
  41. Owner/operation manuals for Jacobs 18
  42. Gearing up ?
  43. 4' wind generator axial design ideas?
  44. Gin pole mounted to freestanding tower ideas for raising a jacobs?
  45. do any salvage yards exist?
  46. 10' has a 11 year anniversary and update
  47. Ideal voltage out of altenatore
  48. 15' footer upright and...well upright
  49. Contactor Rings on Jacobs worn out
  50. Use a Nissan leaf electric motor for a >10kw wind generator