View full version: Wind
  1. how to build laminate blades?
  2. Barco WM alternative VAWT? [CLOSED]
  3. How to choose the right generator motor?
  4. Fixed Vertical Wind Tower?
  5. optimal vawt design questions
  6. Wind Turbine and Tower
  7. looking for a posting about designing turbine from scratch
  8. Wyatts 12 Footer
  9. Indiana General 24 volt
  10. Epoxying anchor rod in concrete (at wrong angle)
  11. Carbon fiber blades
  12. Inverter Pending UL approval
  13. 20 Ft wind turbine
  14. Homebrew Windpower Book Discussions
  15. anemometer question
  16. Help on magnets
  17. Great Day for Wind/Sun in NEMO
  18. GE 1HP ECM generator update
  19. 36 Volt golf cart motors
  20. Some GOOD WIND
  21. tower foot print
  22. Found Free Software To Create Blade STL. Files
  23. Will the Lift from Prop try to up force or Down force
  24. Blade theory 102
  25. Will this be stable?
  26. How to determine motor suitability for turbine alternator conversion
  27. Is Oak usable as blade material
  28. Glues used for laminating blades
  29. How long, MTBF
  30. Salvaged Stator Wire
  31. First coil winding dissapointment
  32. genny noise
  33. old tail
  34. Local winds
  35. Adding onto a lattice tower
  36. ICE stator and magnets froze
  37. keeping the balance
  38. Tilt Tower
  39. Safe operating RPM
  40. epox resin pouring in cold weather
  41. Question about stator heating.
  42. 10 ft mill almost up
  43. Calculating furling
  44. Dual Voltage machine
  45. Carving Blades from wood
  46. Stratified Wind
  47. F&P smartdrive info needed
  48. Rotor with large magnets
  49. PVC to Wood
  50. 4 pole motor conversion